The method to solve the inaccurate discharge of juice beverage filling machine

Views: 340 Author: Site Editor Publish Time: Origin: Site

Nowadays, with the development of our technology, the beverage machinery filling production line is becoming more and more perfect. At the same time, more and more enterprises are beginning to pay attention to and use the filling machine production line. In the future, the development of high-end juice beverage filling machinery will enter the fast lane. In recent years, the beverage industry has developed rapidly, and the varieties of carbonated beverages, fruit juice beverages, vegetable juice beverages, milk-containing beverages, bottled drinking water, and tea beverages have been continuously enriched. But what should I do if the material is not allowed to discharge when using the filling machine?

2.10

The solution to the inaccurate discharge of the beverage filling machine :

1. Whether the speed throttle valve and the filling interval throttle valve are closed, and the throttle valve cannot be closed.

2. Is there any foreign matter in the quick-install three-way control valve? If so, please sort it out. Is there air in the quick-install three-way control valve and the leather tube of the filling head? If there is air, try to reduce or remove the air.

3. Check whether all sealing rings are damaged, if damaged, please replace with new ones.

4. Whether the valve core of the filling nozzle is stuck or delayed to open, if there is a jam, the valve core should be re-installed in a good position. If the opening is delayed, the throttle valve of the thin cylinder needs to be adjusted.

5. The elastic force of the coil spring is tightened up and down in the quick-installed three-way control valve. If the elastic force is too large, the check valve will not be opened.

6. Whether the filling speed is too fast, adjust the filling speed throttle valve and decrease the filling speed.

7. Whether all the clamps and leather pipe buckles can be sealed well, if so, please correct them.

8. The magnetic switch is not loose, please lock it after each adjustment.