Three in one filling machine

Views: 380 Author: Site Editor Publish Time: Origin: Site

The bottle feeding method of the three-in-one beverage filling machine is directly connected with the bottle feeding dial. The bottle feeding dial adopts an innovatively designed bottle mouth clamping mechanism with bottle separation function, and the bottle feeding screw and conveyor chain are cancelled. There is no need to replace or adjust any parts when changing the shape of the bottle.

11.5


The three-in-one filling machine is equipped with a bottle jam protection device, and the capping disc is all welded by stainless steel AISI304, and the large flat toothed bearing runs smoothly and reliably. The three-in-one beverage filling machine adopts the flip-type bottle clamp of our company. The bottle clamp clamps the neck of the bottle, which avoids the possible pollution of the threaded part of the bottle mouth caused by the rubber clamp on the traditional bottle clamp. The bottle clip is made of stainless steel AISI304, hygienic and durable. The nozzle of the three-in-one beverage filling machine is a spray nozzle, which can rinse to any part of the inner wall of the bottle, so as to achieve the best flushing effect and save water for bottle rinsing.


The three-in-one beverage filling machine bottle clamp and the sliding sleeve of the lifting mechanism adopt corrosion-resistant and maintenance-free bearings. The power of the bottle rinser is transmitted by the transmission system in the frame through gears. There is no need to adjust the height of the equipment, nor to replace and adjust any parts. The three-in-one beverage filling machine adapts to thinner and lighter bottle shapes, reducing the cost of bottle making; the bottle neck dial is made of stainless steel AISI304. The three-in-one beverage filling machine is equipped with a bottle jam protection device and adopts Italian technology to make the filling speed faster on the premise of meeting the liquid level required for water filling. The bottle lifting mechanism of the three-in-one beverage filling machine adopts corrosion-resistant and maintenance-free bearings, which do not need to be lubricated, which can avoid polluting the bottle, the materials in the bottle and the filling environment.


The filling valve of the three-in-one beverage filling machine is made of AISI304, and is connected with the static and dynamic seal through a stainless steel sanitary pipe. The lifting mechanism is used to realize the rising and falling under the action of the cam, and the filling process is started after the bottle mouth touches the filling valve. The rotating disk is all made of stainless steel AISI304. The power of the three-in-one beverage filling machine is transmitted by the transmission system in the frame through gears. The support bearing is a large plane toothed ball bearing, which runs smoothly and reliably. The bearing part is equipped with multiple reliable waterproof structures such as sealing rings and waterproof rings, which can effectively prevent the water on the table from penetrating into the bearing.