What problems should be paid attention to when the reverse osmosis pure water device is working

In order to ensure the normal operation of the reverse osmosis pure water device, it is necessary to always pay attention to the status of the equipment. What problems should be paid attention to when the reverse osmosis pure water device is running?

When the reverse osmosis pure water device of the filling production line is used for the first time, the conductivity of the effluent will be higher due to the preservative contained in the RO membrane. After washing for 1-2 hours and normal water production for a period of time, the conductivity of the effluent will be significantly reduced.

 Due to the characteristics of RO membrane, the water output of the reverse osmosis pure water device is more than 1000L/H when the water temperature is 25 ℃ . If the water temperature rises or drops by 1 ℃, the water output will increase or decrease by about 3% .

The water entering the RO membrane should be strictly controlled to contain the residual chlorine content below 0.1ppm . The method is: connect the water at the sampling port of the adsorption filter and use the residual chlorine tester to detect it. If it exceeds the standard, the activated carbon filter should be replaced.

If the water inlet is insufficient or the pressure is too low, the reverse osmosis pure water device lacks water and the pressure system will automatically shut down the equipment.

Always pay attention to the status of the reverse osmosis pure water device, understand what needs to be paid attention to when starting and stopping the ultra-clean filling machine and the reverse osmosis pure water device, so as to ensure the stable operation of the equipment.